Equipamiento y maquinaria > Calibradores y probadores usado

FROM A CLEARANCE.

This T and R Test Equipment KV5-100 mk3 is a reliable tool for any business or industrial setting. Its accuracy and efficiency make it a valuable asset to any testing and calibration process. With its durable design, it is built t...

The Microtest MT350 Scanner comes with a durable case and a variety of useful accessories. With its ability to test F-Type Coaxial and RJ45 cables, it is an essential tool for anyone working in cable testing and tracking. The bran...

Bierer PD800W Voltage Detector and Phasing Tester 60Hz. Condition is Used. Shipped with UPS Ground.

If we say the item works, then it was tested to the best of our ability. We have listed all model information that we have available. We strive to provide all information that we have on hand and do our best to describe and photog...

This Bierer PD800W Voltage Detector and Phasing Tester 60Hz is a reliable tool for testing and calibrating electrical equipment. It has been manufactured in the United States and is a trusted brand among professionals in the indus...

+10 to -50dB range. Send Level -10 dB, 0 dB. 100Hz to 20kHz @-50dB. 0dB or -10dB. 600Ω with d.c. path. Resolution 0.01 dB. Frequency Range. Send Frequency.

Light usage. Unit and leads are still very clean, which is unusual for this type of item. In its hard case, and still has the outer sleeve.

3/8″ drive for socket wrenches. Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing. 70 lbf-in/ 7.86 Nm Capacity. USB virtual COM port sends peak (1 data) or continuous data (12 or 1...

Programmable High/Low setpoints with audible beep for uniform torque tightening or GO/NO GO testing. USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second). Selectable units lbf-in, Kgf-cm, N-cm and N-...